Vignette-270-200_Publi

Electrochemical Characterization of a Dense Ceria-Based Interlayer for High-Temperature Electrolysis Cells

Faits marquants

Electrochemical Characterization of a Dense Ceria-Based Interlayer for High-Temperature Electrolysis Cells

Camila Arcos 1, Omar Rahmouni2, Virginie Lair1, Pascal Briois2 et Armelle Ringuedé1

1Université PSL, Chimie ParisTech, CNRS, Institut de Recherche de Chimie IRCP, Paris, France
2Université Marie et Louis Pasteur, UTBM, CNRS, Institut FEMTO-ST, Montbéliard, France

There are several methods to generate green H2 as water electrolysis [1]. Water electrolysis can be classified according to the pH and operating temperature: alkaline water electrolysis (AWE), proton exchange membrane water electrolysis (PEMWE), solid oxide electrolysis (SOEC) [2], and high temperature steam electrolysis (HTSE) [3].

HTSE utilizes solid oxide electrolyte-based cells technology which could use seawater directly for electrolysis. The configuration used for the cells are based in planar or tubular geometry and according to the literature, the most promising cell materials are Yttria Stabilized Zirconia (YSZ) and Ni-YSZ cermet [1,3]. However, high-temperature steam electrolysis (HSTE) has technical issues, including rapid cell degradation and unstable electrodes due to the temperature difference in the thermochemical cycle, which accelerates aging and reduces the service life [4]. Therefore, there is a pressing need for further research that focuses on the development of new cell materials to optimize their compositions to increase performance and durability in long-term performance.

This work primarily aims to study the electrochemical performance of thin and dense interface layers of GDC and PrDC to restrict the chemical reactivity and interdiffusion of yttria-stabilised zirconia (YSZ) electrolytes and oxygen electrode materials. Stabilising these interfaces significantly enhances the durability and efficiency of HSTE cells. First, a layer of ceria-based ceramics Gd0.1Ce0.9O1.95 (GDC) was deposited due to their favorable electrochemical properties [5] by physical layer deposition (PVD), particularly the magnetron sputtering technique. The second layer deposited was CexPr1-xO2-x to further optimize oxide-ion conductivity (O2-), reduce electronic conductivity, and ensure chemical compatibility with both the electrolyte and oxygen electrode materials. Electrochemical impedance spectroscopy has been performed and results will be presented.

Acknowledgements

This work is part of the PEPR-H2 program by ANR, France 2030 program, referenced as ANR-22-PEHY-0008.

Références

[1] Fallah Vostakola, M.; Ozcan, H.; El-Emam, R.S.; Amini Horri, B. Recent Advances in High-Temperature Steam Electrolysis with Solid Oxide Electrolysers for Green Hydrogen Production. Energies 2023, Vol. 16, Page 3327 2023, 16, 3327.

[2] Jang, D.; Cho, H.S.; Lee, S.; Park, M.; Kim, S.; Park, H.; Kang, S. Investigation of the Operation Characteristics and Optimization of an Alkaline Water Electrolysis System at High Temperature and a High Current Density. J. Clean. Prod. 2023, 424, 138862.

[3] Kumar, A.; Kalaskar, A.; Patro, P.K.; Lenka, R.K.; Sinha, A.; Mahata, T. Modeling and Parametric Study of Tubular High Temperature Steam Electrolysis (HTSE) Cell for Enhanced Hydrogen Production. Int. J. Hydrogen Energy 2024, 96, 1215–1231.

[4] Xiang, T.; Ya, H.; Wang, Z.; Zhao, X.; Xie, H.; He, J.B.; Chen, C. Decoupled Water Electrolysis Hydrogen Production Enabled by Ni-Based “Solid Membrane” towards Integrated Systems. Int. J. Hydrogen Energy 2025, 170, 151257.

[5] Brahim, C.; Ringuedé, A.; Gourba, E.; Cassir, M.; Billard, A.; Briois, P. Electrical Properties of Thin Bilayered YSZ/GDC SOFC Electrolyte Elaborated by Sputtering. J. Power Sources 2006, 156, 45–49.